F Series: Fast, Safe, and Flexible
The F315 and F515 model winches are the latest addition to the FTSI "F" Series flying winch family, a line of fully self-contained, high speed winch machines intended for performer flight, stunt, and high speed motion applications. "Self-contained" means that everything necessary to run the winch is built into the robust aluminum frame. The servomotor and gearbox, braking system, cable drum and cable retention system, and all motion control and motor drive equipment reside within the walls of the winch frame. All that is required for operation is the connection of 208V power and a control source, whether it is an independent handheld controller, or a network connection to a larger Navigator system. Winches may be operated as stand-alone, programmable units, or incorporated into a larger multi-winch setup, or both. They are well suited for performer flight effects, stunt and acrobatic work, high speed camera and scenery manipulation, and 3D motion control when grouped with one or more additional units.
All controls and inputs are exposed on the side panel of the unit, allowing for easy networking, external triggers and limits, multiple external control sources, local jog and status control, and a wide range of additional functions.
F515 Specifications
- Up to 1000lbs line pull.
- 15' per second maximum velocity.
- Up to 2G acceleration.
- 31.41 inches per drum revolution.
- Drum capacity: 125'-1/4" rope.
- Network ready or stand-alone.
- Power requirement: 100 amps @ 208v 3-phase.
- Footprint: 43" wide x 40.50" long x 22.13" tall.
- Weight: 740 lbs.
Key Features
- Variable speed from zero to 15 feet per second.
- Variable acceleration and deceleration.
- Frame tube spacing matches 20" box truss.
- Mount in any orientation.
- Full torque available down to zero speed.
- Multiple controller options.
- Adjustable spring loaded line keeper rollers.
- Redundant braking system.
- Camlok connectors for power input.
- Runs on standard 208 V 3-phase power input.
- Navigator system compatible.
M Series: High Powered Modular Winch System
The FTSI "M Series" winches are a completely modular servo winch system featuring motor and control units that are capable of extremely high sustained speeds and loads. Each winch system is composed of three modular elements: The motor unit, the drum or driver unit, and the control unit. The motor and drum units are built into framing that is an exact match for standard 20.5" bolt-together aluminum truss, while the controls are either packaged in similar framing or as standard rack units. The motor and drum units bolt together in exactly the same manner as two pieces of truss, and the unique self-mating coupling assures a secure drive connection between the motor and the drum.
Users may select the power level of the motor unit and the type and size of drum unit or driver assembly that is required for their application. Additionally, multiple drum units may be rented with single motor and control packages to provide users with a variety of drive applications at a minimal cost. The modular nature of the system provides for a wide range of combinations, including standard single drums, multiple ganged drums, "endless" friction drive drums, and belt and chain sprockets. Custom fitments of the couplings are also available for users needing to mate the power and motion control of the units to their own custom machinery.
Unit Specifications
- Motor Module: 410 lbs.
- 250' Drum Module: 520 lbs.
- Endless Drum Module: 390 lbs.
- Control Module: 400 lbs.
- 480 VAC, 3phase, 100A power.
- Speeds up to 75 feet per second.
- Loads up to 500 pounds.
- Acceleration up to 1.5 G.
- Synthetic or wire rope.
Key Features
- High power--High speed
- Modular design for easy transport and configuration.
- Multiple motor and drum combinations available.
- Redundant braking and safety systems.
- Self-mating coupling between motors and drums.
- Standard 20.5" box truss framing and bolt patterns.
- Multiple spring loaded urethane keeper rollers.
- Fully Navigator system compatible.
- Clip on caster assemblies for easy transport.
- Mount in any position.
- Controls can be remote from winch location.
FTSI Track System
The FTSI Track System is based on a super smooth, super stiff low profile extruded aluminum track design, available in both heavy duty and light duty versions. The heavy duty version is intended for high load, high rigidity applications, and the light duty version for lower load applications. Both track models feature FTSI's exclusive captured track channel, which surrounds and secures the high speed roller carriers in the lateral, vertical, and roll axes, providing a smooth, secure, and precise tracking action.
The system builds from the track extrusions to include a variety of roller carriers, suspension and support accessories, splicing plates, accessory mounting brackets, end stops, double track attachments for folding and a wide range of plates and mounts. Custom applications and attachments are made simple by the T-slots that are integrated into the track extrusion, which also mate directly with standard commercial structural framing systems.
Track System Accessories
- Skate attachments for scenery hangers, deck tracks
- Several models of feet for floor support.
- Cheeseboro and grapple-style truss mounts.
- End stops and bumpers.
- Speed rail fittings and spuds.
- Winch attachments for motorization/automation.
- Dual track camera dolly setups on standard centers.
Key Features
- High load capacity to weight ratio.
- Multiple skate and carrier choices.
- Mount in any orientation.
- Full length T-slot extrusion for attachments.
- Super smooth splice transitions.
- Multiple choices of mounting hardware.
- Compatible with standard industrial framing systems.
- Easily customized for specific effects and vents.
- Available in black anodized or raw aluminum.
.jpg)
.jpg)
.jpg)
.jpg)
